G3 / HK RIFLE BLANK FIRE ADAPTER OPTIONS

For HK .30 cal. rifles.  (CETME, PTR etc.)  Will not fit Century Arms models, for those rifles use the AR10 blank adapter.) 
Made from 4140 Pre-hardened steel to hold up to long term use with punishing hot film blanks. 
Will work with any load. Please tell us what blank load you are using so we can set the orifice size before we ship. If no load is given a .100 pilot hole size will be sent out for the user to drill to size or we will set it based on the blank you order at the time as well.

These work by removing the flash hider. Placing the BFA inside and then placing the flash hider back on to the rifle. 

You can not see the BFA externally unless you are looking directly down the barrel in good light. You must use caution when you are finished and triple check that the BFA has been removed before putting the rifle ways and/or firing live ammunition. Failure to do so will cause a plugged bore condition and will result in catastrophic detonation of the rifle.  

This is a commonly used BFA type but extra caution must be used for your safety.
Please request a size at check out. If no size is selected, a .100 pilot hole size will be sent out for the user to drill to size.